Best Obd2 Can Bus Pins Reviews in 2021

Bestseller No. 1
OTKEFDI OBD 6 Pin Cable RC Motorbike Kline and CAN-Bus OBD2 Adapter
  • ❤ This 6pin OBD Motorbike cable PIN-OUT is designed for the newer US / Bosch / Indian style connector pin-out (with CAN-BUS protocol). Before purchasing, please check the PIN-OUT is fit to your motorbike.
  • ❤ 6Pin OBD adapter is just a diagnostic connect cable to your motorcycles and OBD scanner/interface.
  • ❤ 6Pin adapter cable is for KTDuke/RC motorbike Can-bus protocol,refer to below details motorbikes list please.
  • ❤ This 6 Pin OBD adapter is compatible with OBD2 cell phone Apps-such as Torque, OBD Fusion and other 3rd party diagnostic softwares
  • ❤ This 6-pin OBD cable is made in good flame retardant material to prevent your diagnostic tools and/or motorcycles.
Bestseller No. 2
Motorbike OBD 4 Pin Diagnostic Adapter, Multistrada Motorcycle OBDII...
  • ❤ With the 4-pin to OBD2 adapter cable you can connect your Duca Monster, Hypermotard, Panigale, Diavel and Multistrada with a 4-pin diagnostic connector Du-cat DDA to a compatible OBD2 diagnostic interface or 327 scanner.
  • ❤ Compatible i.a. with the MultiToolTB Android App, Guzzidiag, Melcodiag.
  • ❤ Read / delete the fault memory.
  • ❤ Reading of live engine data such as speed, rpm, temp, O2 sensor data, emissions, voltages, etc.
  • ❤ Connection 4 pin Duca / diagnostic connection OBD2 DLC socket. High Quality!!
Bestseller No. 3
MakerFocus CAN-Bus Shield Compatible with Ar duino
27 Reviews
MakerFocus CAN-Bus Shield Compatible with Ar duino
  • ★Implements CAN V2.0B at up to 1 Mb/s
  • ★SPI Interface up to 10 MHz;Ariduino/ Freaduino Completely compatible
  • ★Standard (11 bit) and extended (29 bit) data and remote frames
  • ★Industrial standard 9 pin sub-D connector; Size: 78mmx53.5m
  • ★Two receive buffers with prioritized message storage; Operating voltage: DC5-12V
Bestseller No. 4
seeed studio CAN-Bus Shield V2 Compatible with Arduino
  • CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks for CAN-BUS, makers are able to hack their...
  • The CAN-BUS Shield V2 still uses MCP2515 as CAN-BUS controller and MCP2551 as CAN transceiver.
  • Despite of that, there are really many updates. First and most importantly, OBD-II or CAN standard pinout can be selected by switching jumpers on DB9 interface, the default pinout is OBD-II.
  • Secondly we add a TF card slot for data storage and the CS pin can be either set to D4 or D5. The INT pin can also be set to D2 or D3 by switching jumpers on the back of the shield.
  • CAN BUS Shield Work well with Arduino UNO (ATmega328), Arduino Mega (ATmega1280/2560) as well as Arduino Leonardo (ATmega32U4) and LinkIt One.
Bestseller No. 5
For 6pin male to obdii female 16pin adapter for Kawasaki bike both...
2 Reviews
For 6pin male to obdii female 16pin adapter for Kawasaki bike both...
  • ❤Quality moulded cable
  • ❤ Full pinout for Both Can bus and K-line for Ka-wasaki
  • ❤ works along with other code reader to Read Live Data - RPM, Speed, temperatures, O2 sensor data, voltages, emissions values & much more
  • ❤ not only supports models Z900, Z900RS, ZX10R, ZX14R, H2 2017+
  • ❤ Can try with your OBD2 diagnostic interfaces, handheld obd scanner or ELM327 scanner
Bestseller No. 6
CAN-BUS Shield Compatible with Arduino and Seeeduino
  • Implements CAN V2.0B at up to 1 Mb/s
  • SPI Interface up to 10 MHz
  • Standard (11 bit) and extended (29 bit) data and remote frames
  • Two receive buffers with prioritized message storage
  • Industrial standard 9 pin sub-D connector, Two LED indicators
Bestseller No. 7
iKKEGOL 1M 3.3ft DB9 Serial RS232 Female Port to Male OBD2 OBDII 16...
  • ✔This cable allows you to access the pins on your car’s OBDII connector.
  • ✔ It has an OBDII connector on one end and a DB9 female serial connector on the other
  • ✔The overall length of the cable is 1M /3.3 ft /40"
  • ✔This adapter cable is compatible with all OBD II compliant vehicles
  • ✔NOTE: This cable is not meant to be plugged directly into a computer’s serial port. It is meant to plug into some sort of hardware interface. It will not communicate with PC
Bestseller No. 8
Xtool Universal U480 CAN-BUS OBDII Car Diagnostic Scanner, OBD2 CAN...
  • Supports the CAN (Controller Area Network) protols and all other current OBD-II protocols
  • Works with all OBD-II compliant U.S., European and Asian vehicles (OBD-II is standard on all cars sold in U.S. post-1996)
  • Features an easy-to-read backlit LCD screen, multilingual menu and DTC definitions and standard 16-pin OBD-II connector; no additional cables are needed
  • Retrieves generic and manufacturer specific Diagnostic Trouble Codes (DTC)
Bestseller No. 9
OBD Detector Breakout Box CAN Data Line Signal
  • ❤ OBD2 Detector Break Out Box was used for car OBD line signal judgment and signal transfer. Using car fault diagnosis instrument can quickly determine car OBD signal receiving. Signal may not meet angle can take other signal transfer angle. Application...
  • ❤ In the process of using decoder OBD2 breakout box, error can be found and diagnosed OBD connector link
  • ❤ You can monitor the OBD interface voltage and ground, showed low voltage. Display diagnostic stitching error from the OBD detector breakout box
  • ❤ Jump for OBD interface signals. Signal lines such as decoder of 7 to 15 vehicles online.Rapid detection of OBD2 diagnostic connector whether every stitch of the normal communication
  • ❤ This OBD2 detector breakout box is a self OBD diagnostic tool for OBD signal transfer
Bestseller No. 10
OBDII Diagnostic Tool OBD2 Pin Out Box 16pin MB Sprinter Breakout Box...
39 Reviews
OBDII Diagnostic Tool OBD2 Pin Out Box 16pin MB Sprinter Breakout Box...
  • ♥1.This tool is used to change the pin settings of other diagnostic tools/scanners without the needs to cut the connecting cable for re-wiring.
  • ♥2.All test points covered.
  • ♥3.Allows monitoring of any OBD2 diagnostic systems.
  • ♥4.Quickly switch data points without soldering.
  • ♥5.Ideal for checking vehicle\'s diagnostic status.

How Do You Buy The Best Obd2 Can Bus Pins?

Do you get stressed out thinking about shopping for a great Obd2 Can Bus Pins? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Obd2 Can Bus Pins, which is why we have assembled a comprehensive list of the greatest Obd2 Can Bus Pins available in the current market. We’ve also come up with a list of questions that you probably have yourself.

BHBC has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Obd2 Can Bus Pins that you consider buying. Your questions might include the following:

  • Is it worth buying an Obd2 Can Bus Pins?
  • What benefits are there with buying an Obd2 Can Bus Pins?
  • What factors deserve consideration when shopping for an effective Obd2 Can Bus Pins?
  • Why is it crucial to invest in any Obd2 Can Bus Pins, much less the best one?
  • Which Obd2 Can Bus Pins are good in the current market?
  • Where can you find information like this about Obd2 Can Bus Pins?

We’re convinced that you likely have far more questions than just these regarding Obd2 Can Bus Pins, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Obd2 Can Bus Pins, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Obd2 Can Bus Pins. Make sure that you are only using trustworthy and credible websites and sources.

BHBC provides an Obd2 Can Bus Pins buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Obd2 Can Bus Pins currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Obd2 Can Bus Pins has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Obd2 Can Bus Pins?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Obd2 Can Bus Pins.
  5. Customer Ratings: Number ratings grade Obd2 Can Bus Pins objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Obd2 Can Bus Pins.
  7. Product Quality: You don’t always get what you pay for with an Obd2 Can Bus Pins, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Obd2 Can Bus Pins is should be an indication of how long it will work out for you.

BHBC always remembers that maintaining Obd2 Can Bus Pins information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Obd2 Can Bus Pins is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!


Write A Comment